• 您的位置: 紫荷精灵 >> 软件网络 >> server 2012 r2 with update 原生 wimboot
  • server 2012 r2 with update 原生 wimboot

  • 作者:admin  来源:原创  日期:2014/4/12 22:25:08
  • windows server 2012 r2 update 無法原生 wimboot 是由於缺少 \Windows\System32\drivers\wof.sys 以及相應的注冊表項,其他的與 windows 8.1 with update 無異。

    請在winpe5.1環境下完成以下操作
    在完成
    1. wim文件導出 :dism /Export-Image /WIMBoot /SourceImageFile:原.wim文件路徑 /SourceIndex:所選鏡像編號 /DestinationImageFile:目標.wim文件路徑 /scratchdir:臨時文件夾
    2. 建立指針文件:dism /Apply-Image /ImageFile:目標.wim文件路徑 /ApplyDir:指針分區如c: /Index:1 /WIMBoot /scratchdir:臨時文件夾
    后,將 X: 分區的 Windows\System32\drivers\wof.sys 複製到 指針分區的對應文件夾之下,如 c:\Windows\System32\drivers
    然後打開命令提示符,輸入 reg load HKLM\temp 指針分區\Windows\System32\config\system 要將指針分區替換爲盤符如c:
    然後將下面内容用記事本保存爲任意後綴爲 .reg 的文件,如 add.reg ,并運行。運行完之後再次打開命令提示符,輸入  reg unload HKLM\temp ,之後用 bcdboot 建立引導即可。

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\temp\ControlSet001\Services\EventLog\System\Microsoft-Windows-OverlayFilter]
    "ProviderGuid"="{46c78e5c-a213-46a8-8a6b-622f6916201d}"
    "EventMessageFile"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,\
      00,6f,00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,\
      5c,00,64,00,72,00,69,00,76,00,65,00,72,00,73,00,5c,00,77,00,6f,00,66,00,2e,\
      00,73,00,79,00,73,00,00,00

    [HKEY_LOCAL_MACHINE\temp\ControlSet001\Control\WMI\Autologger\EventLog-System\{46c78e5c-a213-46a8-8a6b-622f6916201d}]
    "Enabled"=dword:00000001
    "EnableLevel"=dword:00000000
    "LoggerName"="EventLog-System"
    "MatchAnyKeyword"=hex(b):00,00,00,00,00,00,00,80
    "MatchAllKeyword"=hex(b):00,00,00,00,00,00,00,00
    "EnableProperty"=dword:00000001

    [HKEY_LOCAL_MACHINE\temp\ControlSet001\Services\Wof]
    "DisplayName"="Windows Overlay File System Filter Driver"
    "ErrorControl"=dword:00000001
    "Group"="FSFilter Compression"
    "Start"=dword:00000000
    "Type"=dword:00000002
    "DependOnService"=hex(7):46,00,6c,00,74,00,4d,00,67,00,72,00,00,00,00,00

    [HKEY_LOCAL_MACHINE\temp\ControlSet001\Services\Wof\Instances]
    "DefaultInstance"="Wof Instance"

    [HKEY_LOCAL_MACHINE\temp\ControlSet001\Services\Wof\Instances\Wof Instance]
    "Altitude"="40700"
    "Flags"=dword:00000000

    [HKEY_LOCAL_MACHINE\temp\ControlSet001\Services\Wof\Parameters]

  • 上一篇:将 WIMBoot 映像部署: 如果你知道提前的图像的大小
    下一篇:在工作组环境中如何实现Win8 Hyper-V 客户端远程管理Hyper-V服务器虚拟机